3. On your laptop, launch the Intel Wireless Display software. There are two ways
Installation
To install and set up the Push2TV adapter with Intel WiDi:
to launch the software
Installation Guide
•
If your laptop has a
button or key, press it.
• From Windows, select Start. In the search field, type Intel Wireless Display.
1. Connect the Push2TV adapter to your TV and plug in the power adapter.
Select and run the Intel Wireless Display software.
4. Use the Intel Wireless Display software to scan and find the Push2TV adapter.
Push2TV Adapter for Wireless Display (PTV3000)
The screen on the right shows that the
Intel Wireless Display software has found
the wireless adapter.
Package Contents
5. Double-click the detected Push2TV
adapter to connect to it.
6. If you are connecting the laptop to the
Push2TV adapter for the first time, the
Push2TV adapter displays a 4-digit
security code on the TV. Enter this 4-digit
security code into the Intel Wireless
Display software.
Push2TV
adapter
Power
adapter
The Push2TV adapter LED is blinking when the adapter powers up. The LED
turns solid to indicate that the adapter is ready, but is not yet connected to your
computer.
2. Turn on your TV and select the correct TV input source for your TV.
USB power cable
•
If you are not sure which input source to use, check the documentation that
came with your TV set.
Push2TV Front and Back Views
•
The Ready for Connection screen displays on your TV within 30 seconds.
7. Within a few seconds, the TV screen displays your laptop screen. The LED on
the Push2TV adapter turns solid.
You are now ready to use Push2TV for Intel Wireless Display.
LED
Adjusting Your TV Display
You can adjust the image display on the TV screen:
•
To change how the image fits on the TV screen, on the Intel Wireless Display,
click the Properties button. Then click the Resize TV picture button and adjust
the picture using the plus or minus symbols.
Reset
Wireless
Display
Mode /
WPS
•
To remove black bars displayed on the sides of your TV screen, open the
graphics properties and change the resolution to 1280x720. Changing the
resolution might result in black bars on the laptop. To remove the black bars,
open the graphics properties and clear the preserve aspect ratio check box.
If you do not see this screen, make sure that the TV input is set to the HDMI
port where the Push2TV adapter is connected and all cable connections are
firmly secured.
HDMI
USB Power
|